Galvanized Steel Hydraulic Slitting Machine ZJX2X1250 Of HR / CR / SS / PPGI
 
  
Description
 
1. Hydraulic entry coil car                   
  The car can move levelly and vertically, which is convenient for putting the steel coils into the de-coiler.
  It is driven vertically by hydraulic cylinder with four guide pillars.   
  The level movement is driven by cycloid motor .
  The capacity it can carry is 8 Tons(MAX).
 
 
 
2. Hydraulic cantilever un-coiler
 
  Supporting steel rolls and uncoiling.
  It can expand and shrink with hydraulic oil cylinder and fit with the inner hole of the steel coils and is equipped with supporting stand.
  7.5kw motor drives the coils running and the motor can run right and left to prevent the coils running by inertia.
  The capacity it can carry is 8 Tons(MAX).
 
 
 
3. Slitting machine
 
  Power part: This is composed of power-stand, decelerator, 15KW direct current motor, gear distributing case, coupler, spindle, connecting-cover, side guide device, etc.
  Host machine: This is composed of bottom-stand, fixed bracket, big slide, knife pivot (φ120mm, 2pcs), movable bracket, slide, the front and back adjustable device of bracket, knife pivot lifting and pressing down adjustment device.
  It change the blades through moving out the bracket hydraulically and is very convenient and fast.
 
 
 
4. Scrap winder        
                
  It consists of base, the shaft and plate of scrap material, friction wheel, supporting wheel chain, chain, decelerator and moment motor.
  It is used to pack and wind the slitting scrap strips.
 
5. Tension device
  It consist of base, pre-dividing shaft, bracket, press shaft, hydraulic damp device and hydraulic shaft lifting the press down device.
 
 
 
6. Hydraulic recoiler           
  It consist of base, bearing frame, recoiler shaft, the expansion device of hydraulic recoiling, the expanded recoiling plate, movable arm bearing, supporting decelerator, 30KW frequency conversion control motor.
  It uses the hydraulic movable arm with the supporting spacers to ensure the even recoiling quality.
 
 
 
7. Hydraulic exit coil car  
  The car can carry the dividing coils and lift up and down and is movable.
 
 
8. Electric control system: electric cabinet and operate table.       
9. Hydraulic system: the hydraulic stand, pipes and the connect part.
 
 
Applications
ZJX-0.5-1.5X1250mm simple hydraulic slitting line is used for slitting the CR/HRC/stainless steel /galvanized to prepare for the next process.
 
 
Specifications
 

 
 
Competitive Advantage
 
 

1. convenient to operate
2. accurate precision of shearing
3. high ratio of performance to price
4. tidy recoiling

 
Customer feedback
 
 
If you need the high speed and automatic slitting line, here our company is !
If you need simple, need special slitting line, we can also meet your requirements!